Catalog

Enabled filters:
    Categories

    Casing Machines There are 6 products.

    Showing 1 - 6 of 6 items
    • $7,900

      NF10426

      High speed and consistency are the hallmarks of the Norfield 1020 casing cutter.  With hopper feed, the double-ended 1020 will produce door casing legs and heads at a rate of about 20 ppm, and the flow-through design deposits finished pieces in a cart on the back side, allowing the operator to concentrate on feeding the machine.  Available for immediate...

      $7,900
    • $6,300 $7,300
      Reduced

      NF10400

      This automatic, double-ended casing cutter produces finished heads and legs at a rate of 20 ppm.  The flow-through design draws from a hopper, cuts both ends (90 or 45), then drops the piece on a cart in the rear.  Very precise, and much safer than a manual chop saw.  Available for immediate sale. When purchasing any used machine, consult your doorshop...

      $6,300 $7,300
    • $11,280 $13,280
      Reduced

      NF10398

      2004 Norfield 1020 Trim Saw available for immediate sale. This machine is equipped with dust collection hookups and has an updated electrical cabinet. Process casing and trim up to 3-1/2” wide at a rate of 20+ pieces per minute. This fully-automated casing cutter is an excellent addition to any size door shop. When purchasing any used machine, consult...

      $11,280 $13,280
    • $5,000

      NF10375

      1981 Norfield 1020 Trim Saw available for immediate sale.  This machine is designed to miter casing/trim up to 3-1/2” wide and up to 25 pieces per minute.  Excellent saw for any size Doorshop.   When purchasing any used machine, consult your doorshop sales person about OEM technical support.

      $5,000
    • $4,210

      NF10305

      1978 Norfield 1020 Trim Saw available for immediate sale.  This machine is designed to miter casing/trim up to 3-1/2” wide and up to 25 pieces per minute.   When purchasing any used machine, consult your doorshop sales person about OEM technical support.

      $4,210
    • $3,000

      RV10044

      Ruvo 808SPL available for immediate sale.  The 808 is perfect for the small to medium sized prehung door shop, the double-ended Ruvo 808 can produce 8-12 pieces per minute, casing or stop, legs or heads.  An added benefit of the 808 is its compact footprint – feed & eject are both on the same side, so the machine can be positioned against a wall....

      $3,000
    Showing 1 - 6 of 6 items