Catalog
Loading...
WS10013
Wise 6800 Automatic Casing & Stop SawHigh output in a compact footprint. The 6800 double mitre saw processes casing OR stop heads and legs at a rate of 10 pieces per minute. Material is fed and ejected from one side, so you can position the machine against a wall. Available for immediate shipment. When purchasing any used machine, consult your doorshop sales person about OEM technical...
NF10400
Norfield 1020 Automatic Casing SawThis automatic, double-ended casing cutter produces finished heads and legs at a rate of 20 ppm. The flow-through design draws from a hopper, cuts both ends (90 or 45), then drops the piece on a cart in the rear. Very precise, and much safer than a manual chop saw. Available for immediate sale. When purchasing any used machine, consult your doorshop...
NF10398
Norfield 1020 Automatic Casing Saw2004 Norfield 1020 Trim Saw available for immediate sale. This machine is equipped with dust collection hookups and has an updated electrical cabinet. Process casing and trim up to 3-1/2” wide at a rate of 20+ pieces per minute. This fully-automated casing cutter is an excellent addition to any size door shop. When purchasing any used machine, consult...
NF10393
Norfield 1020 Automatic Casing SawWith hopper feed and a flow-through design, the 1020 produces a high volume of mitred casing in a short time period. Both saw heads are power angulated for 90° or 45° for legs and heads. The reciprocating feed system positions and clamps the material while both saw heads cycle automatically. This machine is dust collection ready and available for...
NF10375
Norfield 1020 Automatic Casing Saw1981 Norfield 1020 Trim Saw available for immediate sale. This machine is designed to miter casing/trim up to 3-1/2” wide and up to 25 pieces per minute. Excellent saw for any size Doorshop. When purchasing any used machine, consult your doorshop sales person about OEM technical support.
FH10045
Full House TrimmerAre you cutting trim with a chop saw? Save hours every day with the Trimmer automatic casing cutter. Here’s how it works: place the stick in the Trimmer – the machine clamps the piece, cuts both ends simultaneously (legs or heads), then ejects the piece out the back of the machine for a fast, flow-through process. Important note: the Trimmer is much...
NF10305
Norfield 1020 Automatic Casing Saw1978 Norfield 1020 Trim Saw available for immediate sale. This machine is designed to miter casing/trim up to 3-1/2” wide and up to 25 pieces per minute. When purchasing any used machine, consult your doorshop sales person about OEM technical support.
RV10044
Ruvo 808SPLRuvo 808SPL available for immediate sale. The 808 is perfect for the small to medium sized prehung door shop, the double-ended Ruvo 808 can produce 8-12 pieces per minute, casing or stop, legs or heads. An added benefit of the 808 is its compact footprint – feed & eject are both on the same side, so the machine can be positioned against a wall....