

NF10519
Produce high volumes of casing legs and heads in a short time. The flow-thru 1020 is fully automated: load material into the hopper, and the machine automatically feeds each piece, cuts a 90 or 45 on both ends (heads and legs) and ejects the piece out the rear onto a cart. Throughput rate is about 20 pieces/minute. Change-overs for length and angles is quick and easy. This unit also comes with an additional motor.
When purchasing any used machine, consult your doorshop sales person about OEM technical support.
Casing Material | Min | Max |
Width | up to 3-1/2" | |
Length | 1'6" | 8'0" |
Thickness | 3/8" | 1-1/2" |
Min | Max | |
Compound Angle | 0° | 10° |
Angle of Cut | 90° | 45° |
Max. Capacity | 30 cycles per min | |
Avg. Capacity | 24 cycles per min | |
Approx. Shipping Weight | 1,600 lbs | |
Floor Space | 6' x 14' | |
Electrical | 230V 60Hz @ 15AMP 208V 3Phase @ 60HZ 15 Amp 460V 3Phase @ 60HZ 10 Amp 115V Single Phase@ 20 Amps |
|
Air | 22CFM @ 90PSI (1/2" I.D. min. line size) |
Data sheet