- Just Added

NF10523
Prep door and jamb for hinges, and prep the door for lock, latch, and latch plate in just seconds with the Norfield Magnum door machine. This well taken-care-of machine has been upgraded with DC feed motors, rubber and rollers. The classic strike machine produces 2-3 jambs/minute. Wide variety of templates are available from Norfield for mortising nearly any shape desired, including full lip, deadbolt, and magnetic catch.
These are legacy machines that are no longer serviced by the OEM and has limited technical and parts support.
Capabilities | Min | Max |
Door Width | 1'6" | 4'0" |
Door Height | 8'0" | |
Door Thickness | 1-1/8" | 1-3/4" |
Jamb Width | 3-1/2" | 10-1/2" |
Jamb Height | 7'0" | |
Jamb Thickness | 1/2" | 1-1/8" |
Butt Size | 3-1/2", 4", 4-1/2", 5" | |
Butt Spacing | Infinitely variable | |
Butt Radius | 1/4" and 5/8" | |
Lock Backsets | 2-3/8" | 5" |
Faceplate Router | up to | 1-1/8" x 2-3/4" |
Approx. Shipping Weight | 2,600 lbs | |
Floor Space | 5' x 18' | |
Electrical | 230v 3 60hz. 50AMP and 230V 1 60HZ 30 AMP STD | |
Air | 2.2CFM @90PSI, 8.5CFM@90PSI |
Data sheet