All Machines There are 48 products.

per page
Showing 37 - 48 of 48 items
  • $4,210

    NF10305

    1978 Norfield 1020 Trim Saw available for immediate sale.  This machine is designed to miter casing/trim up to 3-1/2” wide and up to 25 pieces per minute.   FOB OR

    $4,210
  • $4,310

    NF10301G

    The high speed Norfield 2200 will produce a finished interior strike jamb every 10 seconds or so.  Save labor and improve quality by placing this machine at the assembly stage of your door production line. This machine is no longer supported by Norfield and is sold as is.  Available for immediate shipment. FOB NC This is a legacy machine that is no longer...

    $4,310
  • $4,500

    RV10047

    Ruvo 9715 Door Lite Machine available for immediate sale.  The 9715 is a simple, fully featured door lite machine capable of cutting out lites, lock holes, latch holes, and mortising the faceplate on the edge of the door.  Well suited to wood, steel, or fiberglass.  Training and installation available. FOB MT Check with OEM on the level of technical...

    $4,500
  • $4,975 $12,000
    Reduced

    NF10267

    Perfect for a new shop or a shop looking to expand. The legendary Norfield V85 Fast Framer will allow fast and efficient production of face frames.  FOB CA

    $4,975 $12,000
  • $12,790

    WS10008

    This automatic loader provides a huge efficiency boost to any horizontal door line by eliminating 10-20 operator steps for door retrieval.  Further, the opportunity for back injuries due to lifting is eliminated.  Feed from a stack of various sizes, up to a 60 count (of interiors.)  f.o.b. VA. Check with OEM on the level of technical support for this machine

    $12,790
  • $3,000

    RV10044

    Ruvo 808SPL available for immediate sale.  The 808 is perfect for the small to medium sized prehung door shop, the double-ended Ruvo 808 can produce 8-12 pieces per minute, casing or stop, legs or heads.  An added benefit of the 808 is its compact footprint – feed & eject are both on the same side, so the machine can be positioned against a wall.  FOB...

    $3,000
  • $165,000

    FH10034

    This Full House is late model and in great shape; surplus due to consolidation.  Capable of 6-8’s AND 8-0’s, this complete line includes a full size Loader (front feed), Marquise L door machine WITH auto screwfeeding and hinge applicator, and Assembler.  For added value the door machine features quiet and long-lasting high frequency router motors.  Cycle...

    $165,000
  • $6,500

    RV10027

    2007 Ruvo Tilt Table available for immediate sale. The Tilt Table is designed to allow one operator to apply brick mold or casing to an entire single door unit. Once casing is applied the operator can stand the finished unit in the upright position. FOB Kansas Check with OEM on the level of technical support for this machine

    $6,500
  • $10,000

    RV10025

    2007 Ruvo 9655 Exterior Assembly Table available for immediate sale. The 9655 is used for the assembly of exterior door units. Includes 8-0 capability and change over from left to right hand doors is done with a flip of a switch. Installation and training available. FOB Kansas Check with OEM on the level of technical support for this machine

    $10,000
  • $700

    OT10015

    Roller / Casing Application Table available for immediate sale. This roller table can be used by one operator to apply casing to finished door units. One fixed side and one moveable side allows the operator to manually adjust for different door widths. 2 table available. FOB Mississippi State. Check with OEM on the level of technical support for this machine

    $700
  • $300

    OT10014

    Metal door cart available for sale. Capable of moving single and double door units. 4 carts available. FOB Mississippi State. Check with OEM on the level of technical support for this machine

    $300
  • $8,800

    FH10029

    The FH loader automatically draws from a stack of doors up to 7’ high and places each door on a horizontal feed table for presentation to a horizontal door production line.  Well suited to interior or exterior prehung door production.  This example is not currently in service and will require some repair work to be made operational.  Check with OEM on the...

    $8,800
Showing 37 - 48 of 48 items