All Machines There are 48 products.

per page
Showing 25 - 36 of 48 items
  • $11,600

    NF10350

    Produce a high volume of door casing in a short time.  The flow-thru 1020 is fully automated: load material into the hopper, and the machine automatically feeds each piece, cuts both ends (heads and legs) and ejects the piece out the rear onto a cart.  Throughput rate is about 20 pieces/minute.  Change-overs for length and angles is quick and easy. FOB VA

    $11,600
  • $2,870

    RV10053

    Speed up door production and improve product quality with the Ruvo 1600.  Pneumatic clamping and a fixed fastening tools ensure the correct spacing, location, countersink, and quantity on every jamb.  Just place the jamb and stop in the machine and all guns fire simultaneously.  This process eliminates stop application on your door production line....

    $2,870
  • $25,000 $48,510
    Reduced

    KV10047

    The Kval RKG system is the solution for high production of exterior door units.  This purpose-built line clamps, rotates, and tilts singles or heavy multiple door units, speeding up production and reducing chance of injury.   FOB IL

    $25,000 $48,510
  • $10,000

    KV10046

    KVAL ON 2 Loader available for immediate sale.  This loader can be paired with various KVAL Machining Centers and will automatically pick from door stacks to feed specific door lines.  The machine was in use up until being disconnected.  FOB TX

    $10,000
  • $9,870 $13,170
    Reduced

    RV10051

    Enter the high volume prehung door business at a bargain price.  The Ruvo 925 automatically mortises 2 or 3 hinge pockets in the door and the jamb, preps the door for lock in the face and edge, AND preps the strike jamb, all in about 45 seconds.  This 925 may be fed by the included model 2002 automatic door loader, which increases throughput speed and...

    $9,870 $13,170
  • $65,700 $96,400
    Reduced

    NF10337

    Produce high volumes of 6/8’s AND 8/0’s with the Norfield Eagle automatic door line.  This complete system includes:        Model 530 Automatic Door Loader         Model Eagle MC Automatic Door Machine w/Ball Catch Drills         Eagle Automatic Hinge Applicator with Screwfeeding         Model 540 Automatic Door Frame Assembly Machine  This Eagle is...

    $65,700 $96,400
  • $2,500

    NF10333

    Norfield DoorTech 3300 available for immediate sale.  The DoorTech 3300 is used for mortising hinge and strike jambs while using phenolic templates and hand held routers.  Ideal for small shops and potentially portable (110V & minimal air requirements)  FOB TX

    $2,500
  • $2,600

    NF10327C

    Norfield 250M Strike Router available for immediate sale.  This machine will mortise strike jambs for interior, exterior and commercial strike plates.  With over 700 templates available it is the most popular strike router on the market.  This 250M has been upgraded with the DeWalt 616 Router upgrade and is tuned up and ready to go.  FOB CA

    $2,600
  • $30,000

    NF10326

    Norfield 4000 System available for immediate sale.  This system was in use until it was replaced on 4/21/20.  The system includes the Norfield 4000 Machining Center, KVAL Loader and KVAL Assembly Center.  Capable of machining doors up to 6’8” tall and 3’-6” wide.  Typical production rates of 200-300 doors per shift are common with two operators.  This...

    $30,000
  • $1,950

    OT10032

    Perfect for the expanding glass shop! The 2ea 10' X 8'  air  tables. The Somaca cutter is 10' wide. 1 air table is currently not working. F.O.B MN

    $1,950
  • $3,900

    NF10320

    Norfield 1020 Trim Saw available for immediate sale.  This machine is designed to miter casing/trim up to 3-1/2” wide and up to 25 pieces per minute.  Refurbished by Builders Automation (BAM) back in December of 2019. Installation and training available. FOB AR

    $3,900
  • $65,000 $75,000
    Reduced

    RV10049

    2007 Ruvo 930 Hercules line available for sale.  The Ruvo 930 is an interior/exterior pre-hung door machine with the ability to machine the door, hinge jamb and strike jamb at the same time.  The 930 is capable of machining doors up to 8’-0” tall and up to 4”-0” wide.  This system includes a 2007 Ruvo 2002 Door Loader and a Wise Assembly Center.  This a...

    $65,000 $75,000
Showing 25 - 36 of 48 items